DIY greenhouse (58 photos)
I tried to film the manufacturing process in as much detail as possible. First, we prepare the strapping rectangular frame. They decided to make the greenhouse 2x6. A 25mm corner was used as the frame material.
The frame itself.
It's him.
Next, we prepare the attic element, so to speak. You need 7 of these.
He's the same
To make such corners, a corner cut into a corner was prepared in advance. Oil oil..
keep cooking
He's the same
There are more angles, the workpieces are almost ready
Actually, one’s beloved one also had to perpetuate
He's the same
We mount the corners on the frame.
On the other hand too
This way we put all the corners in their place
Another perspective
For now, we're moving the attic aside. A lower rectangular trim is needed.
Making the bottom trim
We are preparing meter supports.
We mount the supports in their places in the corners.
From the other end.
We put the attic in its rightful place.
Add supports, scald
Well, here they are all in place
Here we will have a window
Preparing the window frame
We hang it.
Window in place
And here there will be a door. Cut out the extra piece.
Almost ready
She's the same
Pay attention to the corner inside the greenhouse. In the corners on both sides. Made for shelves. The door is ready.
She's the same
Smoke break.
Although in principle the frame can be considered ready
Heavy artillery comes to the rescue.
mandatory painting of the future greenhouse with a primer.
It's her. My father and I are watching football at this time. 1:1. Well, at least that's it.
Let it dry, it’s already dark outside.
The next day, Saturday. We drill holes throughout the frame. For fastening the greenhouse cover.
here are the holes
they are
we install the greenhouse in its rightful place
The child naturally helps.
Placed, leveled, ready to sheath.
From the end.
We started covering
Already pleasing to the eye
Polycarbonate was perfect. The wind was a little disturbing.
It's her. My father and I are watching football at this time. 1:1. Well, at least that's it.
We put in the third sheet.
Closer
Sew up the end.
He's the same
We sheath the door with a slight overlap for tightness
Boris Petrovich watches all this from the side.
Smoke break
We continue to sheathe
Basically the final result.
And this is last year's greenhouse. In the new one they made a larger window. We took into account the mistakes of last year.
This was done 2 years ago. This design turned out to be impractical. As they say, the first damn thing is lumpy. That's all I wanted to say. Thank you all and have a good harvest.
